My Zoodad install with pics - Page 2

jrickey · #11 (**permalink**) 10-03-2007, 11:37 AM

Looks good man. I see alot of people doing these mods and alot of theories about water issues. Have any of you had any water issues after doing this mod?

Blue01F250 · #12 (**permalink**) 10-03-2007, 04:26 PM

My experience - NOPE (I have a 7.3)

dennis m herrin · #13 (**permalink**) 10-03-2007, 04:38 PM

what is a zoodad

ncbowhunter · #14 (**permalink**) 10-03-2007, 05:10 PM

great job- i dont have a screen on mine and i havent even checked to see how many bugs or leaves have gotton in there the last 10000 miles

**Diesel Freak** · #15 (**permalink**) 10-03-2007, 06:31 PM

Great Post Bud!!

caissiel · #16 (**permalink**) 10-05-2007, 03:06 PM

I have an 05 and the support is different. There is a 1/2" wide slot about 4 in long. Well I was able to extend it to 1 1/2" wide X 8" long. This slot is dirrectly behind the left grill verticle bar. the inlet tube area is about 12SqIn and my slot is the same area. Should help.

cchase · #17 (**permalink**) 10-05-2007, 03:25 PM

i used a 1inch an half hole saw, and a sawzal to make mine. I like the it to be perfictly round...Yeah I am not as good as you guys, I just blew the dust out with compresed air from the inside out.

Blue01F250 · #18 (**permalink**) 10-05-2007, 03:58 PM

got my air compressor out and started blowing it out the Zoodad

00strker · #19 (**permalink**) 10-18-2007, 07:10 PM

why not just buy a cone filter and take the air box off

LvTitan · #20 (**permalink**) 10-18-2007, 08:36 PM

what costs 50 bucks ?? i did my zoodad myself and it didn't cost me a dime. i dont have a screen on the front though, that's what i have an air filter for

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode