standpipe kit....dumb question

[PapaJahn]

'evening y'all,

got a dumb question...but i'm not too proud to ask.

in final stages of rebuild....got my standpipes and dummy plugs in today. (shout out to Nickolas at Tousley Ford...never lets me down).

Got the B kit with the 2 pipes and plugs, o-ring for breather, and a chrome plug. OK.....what's the chrome plug for?

I know I should know this, or be able to reference it......But it's been another 100+ day today and I'm sweaty, dirty, and in utter need of a few shots....


any help is appreciated......promise to drink one for each response

PJ

[a2elvis]

its for the icp hole on the oil rail on the drivers side. Both oil rails are the same so they both have holes for the icp sensor. Should be a plug in it now just replace it with the new one

[alha]

I thought I'd at least post another reply, as from the day it sounds like you've had, you'll need more than one shot. Enjoy!

[PapaJahn]

Originally Posted by alha

I thought I'd at least post another reply, as from the day it sounds like you've had, you'll need more than one shot. Enjoy!

Thx *hic