Fuel pressure regulator question

[Misael]

The fpr at the engine fuel filter housing leaks a drop every couple seconds or so. Is there an o ring there that I can replace or do I need a new one? Just bought the truck a few weeks ago so I'm still a newb :p

[NYC F-350]

Well, since there is an updated fuel pressure regulator spring kit, that comes with a new cover and the necessary o-rings, why not get that? It will raise your fuel pressure close to 70psi, while the existing spring is known to weaken over time and could allow the pressure to fall below 45psi. 45psi is the absolute minimum pressure, below that and injector damage will occur.
LINK to the updated fuel pressure regulator spring kit with the new cover

[NYC F-350]

If you want to read a thread showing how to install it: <LINK>

[Misael]

Saweet! Will be ordering it asap, thanks NYC

[NYC F-350]

If you are a true "newb" to this truck/engine, check out the first link in my signature line "basic info." That will give you a good bit of info you should know

[a2elvis]

The regulator kit doesnt come with all the o rings for the whole filter housing. You prob will have to buy the fuel filter housing oring kit and the regulator kit.

[Misael]

It's leaking right where the fpr mounts. Lol can't beat tousley ford! Local stealerships have them in stock but for $80+