Join Date: Aug 2010
Location: Sassamansville, Pa
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Thanked 193 Times in 155 Posts
Feedback Score: 3 reviews
Originally Posted by firstname.lastname@example.org
So my wife just got an 07 F250. It has the big 7 pin that comes out by the hitch.
Well it appears as though someone backed into something with it and its jacked up pretty good.
Does anyone know if this is part of a harness that I can replace? Or am I splicing wires?
Also we have a truck bed camper and I'd like to have a plug in the bed with a pig tail. Anyone know of a good resource for that? Or if there is a plug n play solution?
I don't know how bad your booboo is, but if you crawl under the truck you'll see where the wire harness can disconnect either at the back of the 7pin or further up the harness. Try your local Ford dealer for the 7pin and harness. Most of the aftermarket 7pins that you pick up at a big chain store will have screw terminals for you to use to connect the wires.On my 5th wheel set-up, I also have a 7pin in the bed that gets spliced into the factory wires. There might be an aftermarket company that has the "T" connections for a plug and play set-up.
2004 F350 CC DRW King Ranch
X-3 tunes by DJ'S,QT,GH,ID. Gryphon FICM tunes, ARP studs,Stage 1turbo,ATS coolant recirc lines,Swamp's 48v ficm,coolant filter,AD2,Snow Perf stage II,EGR delete,4" turbo back straight pipe,S&Bintake,Quad "A" pillar autometer gauges,Suncoast Tri Disk Conv.,Billet input shaft,Suncoast superduty rebuild kit,Trans-go shift kit,Mag-Hytec trans pan,CFM+ elbow,ccv mod,15K reese 5er,17" LCD TV/DVD,Cobra 29 Nitewatch CB