Edge,banks,or Bully Dog

I-BE-STROKIN · #1 (**permalink**) 07-06-2007, 09:51 PM

Wassup People, i have been wanting a programmer for a while now, and i want one with the display so i can monitor certain gauges and change certain settings on the fly. from everyones experience who has the better programmer? with the least amount of probablility i will burn my engine. because i have heard of that happening a few times
thanks

its a 6.0

**Raul@Stealth Automotive** · #2 (**permalink**) 07-06-2007, 10:19 PM

Quote:

Originally Posted by I-BE-STROKIN

Wassup People, i have been wanting a programmer for a while now, and i want one with the display so i can monitor certain gauges and change certain settings on the fly. from everyones experience who has the better programmer? with the least amount of probablility i will burn my engine. because i have heard of that happening a few times
thanks

from your pic im assuming you have a 7.3L i run the edge Evo with the attitude display... works great and my dyno numbers are with the edge Evo..... i would also highly recommend the Granatelli Motorsport Fuego programmer... here is a Link to it.. if you have any other questions please let me know

-Raul

troy.d · #3 (**permalink**) 07-06-2007, 11:47 PM

SCT Xcal2 and the livewire is what i would go with, but form what you have posted to chose from ya i would go with the edge

rankroddin250 · #4 (**permalink**) 07-07-2007, 01:21 AM

if your going with one of the three heres annother vote for the edge Im running that in my OBS truck and its been great but if i where to do it all over again I would get a custom burned 6 position chip from one of the many diesel gueroos on the vendor list here p.s.you stole my signiture

Betaracer · #5 (**permalink**) 07-07-2007, 08:08 AM

I don't know any programmer which can be adjusted on the fly. To have that benefit you need a chip or module.

stroker03 · #6 (**permalink**) 07-07-2007, 08:52 AM

Quote:

Originally Posted by Betaracer

I don't know any programmer which can be adjusted on the fly. To have that benefit you need a chip or module.

bullydog does

on th 6.0 stroke, 5.9 cummins and the duracrap!!!

Patrick · #7 (**permalink**) 07-07-2007, 08:59 AM

Quote:

Originally Posted by stroker03

bullydog does

on th 6.0 stroke, 5.9 cummins and the duracrap!!!

True dat, True dat...but its alot of money for that stuff. If the truck is a 7.3l I would go with the Edge Evo if he does not already have gauges. If he has gauges then I would do a custom 6 position chip from Elite-Diesel. If its a 6.0l you all know my choice. Custom SCT from Innovative Diesel. The Quadzilla Commander is a very nice digital gauge display, and yes, If you dont want to burn up your stuff you will need gauges. If I haven't confused you already give me a call monday. LMFAO!