Ford Powerstroke Diesel Forum banner

Other items to change/repair while doing oil cooler and EGR delete

1K views 3 replies 3 participants last post by  Rmorgan711 
#1 ·
As said, what are other things to be considered to change/replace/upgrade on an 03 when doing an oil cooler replacement and EGR delete? Thanks.. :icon_ford:
 
#2 ·
This was my list:

3C3Z-6A642-CA Oil Cooler Kit
3C3Z-6C683-AB HPOP Screen (Included with newer kits)
3C3Z-9433-BE Intake Gasket Kit (Includes Turbo hardware)
3C3Z-9T517-AG Fuel Pump Regulator Kit
6C3Z-9T515-A Turbo Drain Tube
3C3Z-8575-AA Thermostat
Oil & Filter Rotella T6 (4 gallons) & Filter
AntiFreeze Zerex G-05 (4 gallons) <-- Swapping out to ELC come springtime
FD-4604 Fuel Filters
Water Filter Diselsite Filter +3 filters
14500 Lisle fuel filter socket
VC-9 Radiator Rust Flush (2-Quarts)
Distilled Water (18 gallons)
 
#3 ·
Cool. Thanks. Got the oil cooler kit as well as the EGR delete. Also already have a thermostat, so I just need to intake gasket kit, and the turbo drain tube. I can easily get the oil and fuel filters. Also already have 3 gallons of Shell Rotella ELC and some restore in the garage. Just need some VC-9.

:thumb:
 
#4 ·
get a roll of the heavy duty Electrical Insulating Wrap Tape , it looks like electrical tape but is thicker and sticks to itself ... any worn spots on the harness's can be wrapped back up while your in there
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top