![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Anyone Ever use EVANS NPG+ coolant
I'm getting ready to flush my coolant system and can't decide on using an ELC or try the Evans NPG+. I like the idea of the no pressure coolant system (very little chance of a hose blow out). But, just wanted to hear from others using the Evans (or ELC). I will be install a coolant by-pass filter from dieselsite.
Thanks in advance for all contructive comments. |
| Sponsored Links | ||
Advertisement | ||
|
|||
|
I haven't seen anything about that. I know some folks have had good luck with it and some not in the racing world. Seems like it might be a good alternative to ELC, but we know the ELC works.
|
|
|||
|
Every single WP and Rad manufactor says don't..good enough for me.
|
|
|||
|
i tried it like 2 years ago. bought a extra degas bottle cap and drilled a small hole in it to vent pressure off. i drained it out after about a year. i had a problem with my heater blowing cold when stopped at a light or idleing. i blamed this on the thicker viscosity of the evans. i changed back to the stock stuff and havent had a problem since.
|
|
|||
|
I just replaced the gold crap with the cat elc. The best thing I ever did. I do noticed that when I tow, that I'm running alittle cooler.
|
|
|||
|
Thanks guys, after your suggestions, I'll use a ELC.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|