04 6.0 ICP problems

99 Stroker · #1 (**permalink**) 10-14-2010, 11:35 PM

137,000 miles on the truck mods are in my sig. I replaced the ICP sensor about 6 months ago, wiring harness was still fine and not soaked, i also cleaned it off. The truck is starting to surge again and idle a little weird and i can see oil on the sensor and pigtail again.

I was not really aware this was a common problem on the old motors but i have recently been told it is. Is there anything i can do to prevent it in the future or is this an indication of something bigger? Thanks in advance!

**PGreenSVT** · #2 (**permalink**) 10-15-2010, 09:26 AM

Your surging could also be sticking vanes in the turbo or the VGT solenoid acting up.

99 Stroker · #3 (**permalink**) 10-15-2010, 01:01 PM

any diagnostic things i can check? thanks!

**PGreenSVT** · #4 (**permalink**) 10-15-2010, 04:50 PM

Something like Autoenginuity can tell you those things. You need a real diagnostic package.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement