Oil Analyzers Report

elm302 · #1 (**permalink**) 02-13-2010, 10:06 AM

I got my report back today what do you guys think I only have 6500 miles one the oil and oil bypass can someone explain this any better to me thanks guys.

elm302 · #2 (**permalink**) 02-13-2010, 10:07 AM

crap no link how do I get my pdf file on here

blackjudas · #3 (**permalink**) 02-13-2010, 10:08 AM

Under additional options, you select your attachments.

elm302 · #4 (**permalink**) 02-13-2010, 10:10 AM

C:\Users\brett\Downloads\ETHAN_KENNEDY-I483837-Sev3.pdf.

elm302 · #5 (**permalink**) 02-13-2010, 10:12 AM

did i get yet lol

**Goose350** · #6 (**permalink**) 02-13-2010, 10:12 AM

Click on advanced options. Scroll down to additional options and then click on manage attachments.

elm302 · #7 (**permalink**) 02-13-2010, 10:42 AM

Thanks guys I think I got it

cartmanea · #8 (**permalink**) 02-13-2010, 12:59 PM

Fuel is high and viscosity is low. Fuel could be too much idling. Viscosity could be fuel and too long OCI, try to keep it to 5k max.

bismic · #9 (**permalink**) 02-13-2010, 01:03 PM

Your oil viscosity was at the low end of a 30W oil. Could be from the fuel dilution. I have never seen over 0.5% fuel dilution in my UOA, but (from what I have heard) Ford doesn't seem to be concerned when it is under 5%. That would be way too high for me.

elm302 · #10 (**permalink**) 02-13-2010, 01:16 PM

So 5 k is Max even with a bypass and how bad is this do I have a problem or pretty normal

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement