Ford Powerstroke Diesel Forum banner

Need help finding where this sensor goes ?

487 views 3 replies 3 participants last post by  cthurston09 
#1 · (Edited)
Not sure how I missed this - I took the bed off to paint the frame.

I don't know if it was already unplugged or I unplugged it and just forgot.

Any help would be appreciated.

Thank you
 

Attachments

See less See more
1
#2 ·
That's just the vent tube for rear axle/diff. It should hang pretty much straight up. Quite often the bottom will rot off the nipple on axle housing and be too short to reattach.
 
#4 ·
That is correct. You can just zip tie it or secure it another way as straight up as you can
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top