CP3 conversion

[Zytek_Fan]

Has anyone tried a CP3 conversion on their 6.0?

[chvyrkr]

Don't think anybody's even tried to make a different cover...

[03f250stroke]

Originally Posted by Zytek_Fan

Has anyone tried a CP3 conversion on their 6.0?

we dont have that type of injection nor do we have an injection pump. our injectors are electronic. i know one guy who made an injection pump work on a 6.0. i never read up on it anymore. i heard it was running though

Originally Posted by chvyrkr81

Don't think anybody's even tried to make a different cover...

cover? what?

[chvyrkr]

Swamps has a front cover for the 7.3 so you can replace the HEUI system with a cp3/p-pump/whatever and run it off the factory timing gears.

I don't think anybody's tried to do anything like that for the 6.0

[03f250stroke]

Originally Posted by chvyrkr81

Swamps has a front cover for the 7.3 so you can replace the HEUI system with a cp3/p-pump/whatever and run it off the factory timing gears.

I don't think anybody's tried to do anything like that for the 6.0

right, i just thought we were talking about 6.0s

[chvyrkr]

Originally Posted by 03f250stroke

right, i just thought we were talking about 6.0s

We are. He asked about a conversion on a 6.0.

I said, I don't think anybody's workin on a cover.

[03f250stroke]

Originally Posted by chvyrkr81

We are. He asked about a conversion on a 6.0.

I said, I don't think anybody's workin on a cover.

what cover are you talking about?

isnt the 7.3 and 6.0 different in the fuel department?

[chvyrkr]

Originally Posted by 03f250stroke

what cover are you talking about?

isnt the 7.3 and 6.0 different in the fuel department?

Yeah, the 7.3 HPOP runs off the timing gears on the front of the motor.

The 6.0 HPOP is on the back of the motor, but I was thinkin it ran on the same type of setup.

Swamps makes a timing cover for the front of a 7.3, that replaces the entire front timing cover and the HPOP res and HPOP mount. You can mount a CP3, or a P-Pump, or any other inline injection pump to it.

I was speakin genericly, when I said I don't think anybody's tryin to make anything like that for the 6.0.

[Lubbockguy1979]

A guy over on the garage was working or at least talking about running a p pump a few months ago

[RescueF250]

I know of someone building a P pumped 6.0.