Ford Powerstroke Diesel Forum banner

6" lift springs and 1.5" block, need bag help

407 views 2 replies 3 participants last post by  ZMANN 
#1 ·
I have a 2006 f250 ccsb. Has a 6" lift on it, going up to 8" this weekend. Right now i have stock springs and a pmf lift block with the airbag perch which my bags are on currently. The new blocks i got I didn't get the perch. I'm going with 6" lift springs and a 1.5" block under it. I have a set of spring spacers for a 6" lift, but I don't know that that's going to work. Can anyone give me any suggestions or know if it'll still work?

Would I need to have another adapter fabbed up for the other 2 inches? I haven't see an 8" adapter in looking. These are side mount bags, not over the spring bags.

Looking for some suggestions please.

I'm doing the work this weekend btw.
 
#2 ·
Hey James lol I do have a set of the 2" blocks for the rear axle if you wind up needing them to get truck level. I also have some juicy 5" blocks too if you like the raked look.
If you need something fabricated let me know.
Glad to see your getting the springs in. That will help with axle wrap for sure.
Let me know........
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top