Boost guage fitting

jonnysteals · #1 (**permalink**) 07-16-2009, 06:15 AM

I bought autometer boost guage phanton series and I need the boost guage part than attaches the 1/8 line to my map sensor. Mine came unplugged on the ride hoem from work and well melted on my turbo. Now I need a new part and cant find just the boost guage fitting without buying the entire guage again which I am not going to do. Any help would be great.

jonnysteals · #2 (**permalink**) 07-16-2009, 06:21 AM

Heres the aprt I need

**taylorking** · #3 (**permalink**) 07-16-2009, 06:21 AM

hold on a sec, I have some fittings left over from my gauge install sitting in the truck

i'll snap a pic for ya

**taylorking** · #4 (**permalink**) 07-16-2009, 06:25 AM

oh ok, you need the "T" fitting?

jonnysteals · #5 (**permalink**) 07-16-2009, 08:24 AM

No I dont need the t. I need that part that conntect the t to the actually boost line that runs to the guages. you think this might be something I can pick up at the hardware store? Thanks alot

**taylorking** · #6 (**permalink**) 07-16-2009, 08:42 AM

Check out the brass fittings on the plumbing aisle at Lowe's

DryHeatDude03 · #7 (**permalink**) 07-16-2009, 08:31 PM

Jon, I've got one I can give to you if you want it, but I'm on the left coast. Let me know I can throw it in the mail for you.

03f250stroke · #8 (**permalink**) 07-16-2009, 09:22 PM

you and turbos just dont "mesh" well lmao.

and why did you tap your map line for your boost gauge, dont you know how to use and drill and a tap?

jonnysteals · #9 (**permalink**) 07-17-2009, 05:15 AM

Quote:

Originally Posted by DryHeatDude03

Jon, I've got one I can give to you if you want it, but I'm on the left coast. Let me know I can throw it in the mail for you.

Im gonnapm me my info. Let me know your paypal address so I can atleast send you soemthing. I really appreciate this man.

Quote:

Originally Posted by 03f250stroke

you and turbos just dont "mesh" well lmao.

and why did you tap your map line for your boost gauge, dont you know how to use and drill and a tap?

My autoemter came with the may line connector and I didnt feel like tapping the manifold. You are just jealous that my truck make so much boost I blow my boost guage line right out of the map sensor. buahaha you going to diesel nationals?

ABoyAndHisToys · #10 (**permalink**) 07-17-2009, 05:22 AM

Jon, I bought all mine from my local hardware store. I can run around and gather everything if you want to meet me on the parkway somewhere.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement