7.3 won't start

[mech131]

I 've got a 200 F250,engine died,run diagnostic check and my scanner shows
a P1293 and p1294,but my manuels don't show what to look for.anyone got any ideas what to look for.

[mschn99]

Those codes are for both banks having an open cuircuit to between the IDM and injectors. Check all your fuses.....check your connections at the valve covers (inside and out) and check your on themotor for any rat damage for starters

[mech131]

I had aready check the fuse and changed the past thru connector gaskets,just reading the codes,it only shows high fuel pressure,but when I run the injector buzz test those are the codes that i get P1293,P1294,so maybe the idm is bad.appreciate any more suggestions.

[mschn99]

start measuring resistances. If you dont have an open wire between the IDM and the injectors...i would suspect the IDM and or possible water in the IDM connector.