OK, Im baffled here on this one. The hotline is not helping me a whole lot either. I put the #6 injector and an ICP sensor in this truck yesterday. Drove about 1 mile and all of a sudden it was smoking like hell. Got back to the dealership and found #8 injector code.
I started it this morning and it ran great with no shake or miss. Moved it about 100 yards and it looses all power(load and no load), starts hunting the rpm and shuts down. Takes about 30seconds of turning over to restart and then it just does it again. I played this game about 10 times just to get back to my stall in the shop. :crazy:
Im lost guys, im getting a P1670(electronic feedback signal) and a P1211 for injection control pressure. Where do I begin, im looking for anything to help out here.
Thanks in advance!:icon_ford:
I started it this morning and it ran great with no shake or miss. Moved it about 100 yards and it looses all power(load and no load), starts hunting the rpm and shuts down. Takes about 30seconds of turning over to restart and then it just does it again. I played this game about 10 times just to get back to my stall in the shop. :crazy:
Im lost guys, im getting a P1670(electronic feedback signal) and a P1211 for injection control pressure. Where do I begin, im looking for anything to help out here.
Thanks in advance!:icon_ford: