![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
7.3 dies / hard starting after replacing injector seals
Help Please
I pulled the injectors and replaced the seals - Ran fine for 30 miles -test drive - after sitting for a couple hrs. wouldn't start with out a lot of cranking. - after sitting a few more hrs. - startted up and idled for about 5 min. then died - It went back to the orig. behavior of lots of cranking? Any thoughts - Trying to get on the road to ND. thanks Jada In Bremerton, Wa |
| Sponsored Links | ||
Advertisement | ||
|
|||
after 4 or 5 spurts and idling, l let it set overnight and in the morning started it for grins - It ran adn continued through the morning ok. Left for North Dakota. no problem - starts fine down through -9 deg. as long as it is plugged in at night - No idea why the initial hard starting and dying. Any thoughts are welcome
|
|
|||
|
mine did something similar when my injector o-rings needs replaced.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|