![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Compustar remote start help!
Okay so when I got my truck from the auction awhile back it came with a compustar remote (pictured) and I loved having it and now that its getting cold out I would like to have the feature work again BECAUSE my dumba$$ cut the antenna cord thinkin it was something pointless and was for a cell or something, so I tried splicing the wires back together with no fix so I then went and bought a new wire and that didn't work, is there something I have to do to reprogram? Did I frie the brain some how?
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
if all you did was cut the wire the new wire should have fixed it ?
I had an antenna issue also with a pinched wire on my viper ,, after I got that situated it worked fine ,, the12volt.com may be helpful for you |
|
|||
|
Ya that's what I thought as well, maybe I poped a fuse doing a bad rewire
|
|
|||
|
found this if you don't have a manual ?
User Manuals | Compustar.com |
|
|||
|
Okay so I tried the reprogramming and it goes into the mode but the regime won't do anything so my guess is I need a new antenna
|
|
|||
|
when my antenna was compromised the remote would work from 1 inch away LOL
not sure what you need ? |
|
|||
|
My guess is a new antenna lol
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|