![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Changed ficm still no start 06 6.0 new codes 2614 2617 0113.
Truck died running around town. First thought bad fuel, changed fuel filters. Still no start, got codes 0261-0282. Thanks to this forum I diagnosed bad ficm. Got replacement ficm installed. Now hear injectors clicking as they were not doing when it died. My upper filter is not full of fuel. Should it be and could this cause the no start? Its supposed to be self priming. Ideas? Thanks
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
What are the odds? Got it running
Truck died. Engine light had been on for a while code 299, I ignored kept clearing when I got sick of looking at. Truck died, codes for bad ficm showed up. Replaced ficm. Still no start. No fuel pressure at upper filter. Replaced fuel pump. Running now! So maybe ficm was on the way out, fuel pump puked at same time? By the way if you need a ficm look up ronh12 on ebay. rebuilt $200 He has some videos on ebay that were very helpfull. He also was was very helpfull helping me troubleshoot via email.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|