Please Visit our Site Sponsors
|
Please Visit our Site Sponsors
|
 |
|
 |
 |
|
|
|
||||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
03-29-2012, 03:44 PM
|
|||
|
|||
|
Replaced O rings and more...cranks but won't start!
1996 Ford F350 7.3 liter 4WD
Replaced O rings on the injectors. Replaced valve cover harness on both sides. Replaced cam position sensor. Changed fuel filter. Checked the oil and the HPOP reservoir, both checked fine. Had no problems starting truck before doing all of the above. However now I only get crank with no start. The WTS comes on but no tach. Any and all suggestions welcome! 
|
| Sponsored Links | |
Advertisement | |
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
