Dana 60 swap brake issue

2005F250 · #1 (**permalink**) 03-11-2010, 02:28 PM

I put a Dana 60 in my 95 but I'm having issues with the brakes. The axle came from a 89 F350 Kingpin and there is one brake line coming off the frame to the caliper and on the 95 there are two lines giong into one but only on the drivers side. Anyone have any ideas on what I could do? I already tried swapping the lines but it didn't work.

cubid1997 · #2 (**permalink**) 04-05-2010, 06:28 AM

anyone? i wanna know what to do also because i herd this was an issure.?

CT Performance, Inc. · #3 (**permalink**) 04-05-2010, 01:32 PM

No issue at all..PM me I've helped hundreds do this mod over the last 8 years + since I developed it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement