no 4x4

mg05 · #1 (**permalink**) 09-05-2009, 02:23 PM

tried to engauge my 4wd today, and my front wheels are not locking in...

i've got the hubs turned to "LOCK" and the shifter in 4wd....the front drive shaft will stop turning when i engage the shift lever, but my front wheels do not lock in...

what could be the prob?

thanks guys in advance

**Jarrod B** · #2 (**permalink**) 09-05-2009, 03:40 PM

transfer case?

Tony V · #3 (**permalink**) 09-05-2009, 03:42 PM

Check the plug in the side of the transfer case!!! The plugs suck and come out pretty ez

mg05 · #4 (**permalink**) 09-05-2009, 04:14 PM

Plug? My transfer case is working. When my 4wd lever is engaged my front driveshaft turns(doesn't free spin by hand). When I lock in my hubs I can hear them click when rotating the front driveshaft (when 4wd lever is disengage )

**Jarrod B** · #5 (**permalink**) 09-05-2009, 04:23 PM

ok so if the driveshaft stops spinnin when in 4x4. then the case works. so whats left is the hubs. hubs might be bad or stuck.

mg05 · #6 (**permalink**) 09-05-2009, 05:17 PM

How would I go about checking them

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement