What kinda times...?

[99gt]

What do you think my truck will run in the 1/8 mile?

see sig for mods. I'm hoping it will run a 8.6 Guy i know has a 05 LLY with pretty much teh same mods and is running 8.6.

[blackandgoldpowerstroke]

I dont know, hard to say. I've got a 2000 with MBRP 4" turbo back, AFE stage 2, Banks bighead, and at the time an EDGE EVO. Running the truck on the open road while using the Edge as a timer the best I did was a 10.14 1/8th with an 15.42 quarter. Trucks heavy though, crewcab, 4x4, larger tires, loaded toolbox, full of deisel. Since upgraded to a TS - 6 pos.,,,,,,,,,,simply awsome compared to the evo.

[99gt]

i think i'll be able to cut a 1.8-1.9 60ft with her. I've been practicing and the brakes will hold her up to about 2300rpm so i can preload

[iracemx6]

A friend of mine run a 8.9 with the same truck configuration and exact same mods.It was during the summer when he did it so you may knock alittle more off,but you should be close.

[Dockboy]

Originally Posted by 99gt

What do you think my truck will run in the 1/8 mile?

see sig for mods. I'm hoping it will run a 8.6 Guy i know has a 05 LLY with pretty much teh same mods and is running 8.6.

You will be lucky to run 9 flat...probably around 9.1-9.2

[99Smokin73Stroker]

That's what I was gonna say, around low 9 seconds. That duramax will do a lot better than what you think it will, even with the "same" mods.

[Dockboy]

Here is an 1/8 mi time slip of me running against a reg. cab 6.0 with a SCT race tune and the video

http://www.northtexaspowerstrokes.co...y/8.40pass.mov