Please Visit our Site Sponsors
|
Please Visit our Site Sponsors
|
 |
|
 |
 |
|
|
|
||||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-26-2012, 05:42 PM
|
|||
|
|||
|
Will not crank
Hi guys,
I'm new to the forum. I have a problem I created. The former owner of my 2005 F 250 7.3 installed pillar guages and left naked wires twisted together behind the pillar cover. I was going to wire tie these together but when I removed the pillar cover the wires shorted. Now it will not crank, no dash lights, no dash indicators, no glow indicator, no check engine ect. The engine turns over fine. I checked all fuses in the fuse box (good) , unhooked both batteries and reconnected. Any ideas?? Thanks. 
|
| Sponsored Links | ||
Advertisement | ||
|
||
|
06-26-2012, 05:44 PM
|
|||
|
|||
|
correction
I made a typo, its a 2002 f 250 7.3.
Thanks.
|
|
06-27-2012, 04:24 PM
|
|||
|
|||
|
Found the problem thanks anyway
On second look fuse 116 was blown. Just in case anyone is curious:
|
| Sponsored Links | |
Advertisement | |
|
| Tags |
| diesel, electrical issue, wont start. |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
