Please Visit our Site Sponsors
|
Please Visit our Site Sponsors
|
 |
|
 |
 |
|
|
|
||||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-23-2011, 07:14 AM
|
|||
|
|||
|
chaffed wires while replacing ICP
So I replaced my ICP sensor and while I was doing it the other sensor right beside it I noticed a bare wire, so I pulled the wire out of the harness and it was melted and twisted together for about 6 inches. I hope that when I crank it up it runs better, Between the bad ICP sensor and the twisted bare wires it has to.
|
| Sponsored Links | |
Advertisement | |
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
