dead 03 6.0 help

truckdoc · #1 (**permalink**) 04-10-2011, 07:33 AM

just bought an 2003 f-350 from a friend who never had a problem with this truck two days ago it started acting up stalling and finally not starting. had truck scanned to have icp sensor needed replacing. Did that and now only thing I can get to come up with new scan tool is P2287. Any one got any ideas or help . Thanks

Wildstang · #2 (**permalink**) 04-10-2011, 08:38 AM

I would check out the connector and the harness next!

truckdoc · #3 (**permalink**) 04-10-2011, 09:22 AM

I have just replaced the plug now due to it being oil soaked. Now the truck runs for five - ten mins and shuts down and won't start now.

Haydust · #4 (**permalink**) 04-10-2011, 10:46 AM

I would check the IPR valve back on top of the HPOP

truckdoc · #5 (**permalink**) 04-10-2011, 10:50 AM

thanks I will check that.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement