Auto hub maint. help

belz · #1 (**permalink**) 08-20-2011, 07:53 AM

Can anyone help me with this. I would like to take mine apart, clean em up and put them back together but do not know how. A how to or some help would be greatly appreciated.

***NCHornet*** · #2 (**permalink**) 08-20-2011, 10:29 AM

Belz,
This goes into lubing the needle bearing and it is a fairly long process. But it will show you how to pull the esof hubs. I soak mine in ATF for about an hour and then reassemble. Never had a problem. Don't believe everything on Guzzles site, he has some bad info along with some good.

Welcome to guzzle's 4x4 Needle Bearing Maintenance Web Page

belz · #3 (**permalink**) 08-20-2011, 04:57 PM

Thanx Kevin. I wanna clean em up and replace the vac solenoid that's giving me problems.

Sent from my portable forum surfing device.

***NCHornet*** · #4 (**permalink**) 08-21-2011, 06:09 AM

Well that will get them out for a good cleaning, ain't much to them. Let me know if you need any more help.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement