"other" oils??

dubl_t · #1 (**permalink**) 01-22-2009, 06:24 AM

anyone try other oils besides wvo, umo, and utf? I've got some concrete form oil (Mascobond VOC) and am tempted to try it. The contractor I'm working for didn't or couldn't return it. It's sealed as from the distributor, but I don't know, just a little leary. Your thoughts and ideas are appreciated.
Tom.

**Dave** · #2 (**permalink**) 01-22-2009, 06:27 AM

Depending on the manufacturer. Form oil is part diesel already. If your buckets show ingredients post them up before you try it though

dubl_t · #3 (**permalink**) 01-22-2009, 07:11 AM

here's the data sheet (I don't think it's the MSDS though):
http://www.masco.net/vendors/masco_l...VOC%203.06.pdf

The base is mineral oil, but don't know the additives. It retails for about $8/gal, so I kinda hesitate to burn it.
Thanks, Tom.

**Dave** · #4 (**permalink**) 01-22-2009, 07:14 AM

$8 a gallon. I wouldnt waste it

dubl_t · #5 (**permalink**) 01-23-2009, 08:07 AM

well I sold it for $3/gal.
But what other oils are being used here, besides WMO, WVO, UTF? or are there really any other oils? I have heard about one guy getting/using transformer oil, but that sounds scary. I guess maybe though if you are using something "top secret" like, you'd probably wanna keep it that way after the wvo craze.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement