Join Date: Mar 2010
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Vegistroke Main Harness Manual Transmission
I am running my main wiring harness and have realized that a manual transmission does not have a grommet where the shift cable would go through the floor board on an automatic transmission. I have found another hole further down underneath the drivers feet however this hole is not big enough for the 6 pin connector to pass through. I have been trying to disassemble the plug and remove the wires. I have unsnapped a plastic backing and can now move the wires back and forth a bit, but the metal connectors will not come out of the plug housing, anybody have any suggestions?
2000 F250 XLT, Crew cab, 4x4, 6 speed manual, 7.3l diesel 2" Lift, Rancho Shocks.
Soon to be installing a vegistroke v3 kit.