Excursion driveshaft

powerstroke977.3 · #1 (**permalink**) 08-24-2012, 03:13 PM

I have a 2000 ford excursion 7.3 and i need a new rear drive shaft but cant find one.

rjreidhead · #2 (**permalink**) 08-24-2012, 03:19 PM

woodys drive shaft out of utah built me custom shaft for my dodge. can build anything
Tom Wood's Custom Drive Shafts - Tom Woods Custom Drive Shafts Custom Driveshafts Specialist

powerstroke977.3 · #3 (**permalink**) 08-24-2012, 03:59 PM

Thats good but dose anyone make a generic one that will fit all i can find is front drive shafts

**Term3** · #4 (**permalink**) 08-24-2012, 04:08 PM

Quote:

Originally Posted by powerstroke977.3

Thats good but dose anyone make a generic one that will fit all i can find is front drive shafts

No, there are just too many variations for rear drive shafts. Check the wreckers. Why do you need one? Is yours bent or just out of balance?

rjreidhead · #5 (**permalink**) 08-24-2012, 04:38 PM

they can make one with some simple measurements

powerstroke977.3 · #6 (**permalink**) 08-24-2012, 04:59 PM

The spots that hold in the clips for the u joints are totally messed up so the u joints cant sit

chrgd2000 · #7 (**permalink**) 08-24-2012, 05:26 PM

Use this site, you can put in your truck info and it will tell you if any of local salvage yards have any. car-part.com

muddybuddy · #8 (**permalink**) 08-24-2012, 06:09 PM

You should finish filling out your profile including a location and some information on your truck. There might be others on this board that can help you more with the right information.

I would start with eBay or craigslist. There are a ton of rigs out there that are being parted out every day. We all start to keep in the back of our mind where the local ones are just in case.