01 X axle question

[lamoparpower]

Needing a new front axle for my truck... anyone have any ideas if one from a 99' s/d should work? They were both dana 50's i presume? can get my hands on one pretty soon and start building it... Thanks in advance guys..

[Dave]

Should work fine. Same axles as the SD truck. But I would hold out and see if you can find a D60 from an 02 up truck

[Raul@Stealth Automotive]

yup it will work... but if you can find one from a 05+ you could bolt up a 4 link kit

[Dave]

Originally Posted by Raul@Stealth Automotive

yup it will work... but if you can find one from a 05+ you could bolt up a 4 link kit

The 05 axles are different lengths than the 99-04s. It would require wheel spacers and a swap of both front and rear axles unless you wanted to buy two different sizes of rims

[lamoparpower]

Originally Posted by Dave

Should work fine. Same axles as the SD truck. But I would hold out and see if you can find a D60 from an 02 up truck

Couldnt afford another gear job.... as it is ill be stuck running without axle shafts..

Originally Posted by Raul@Stealth Automotive

yup it will work... but if you can find one from a 05+ you could bolt up a 4 link kit

would be nice.... nut no $$... you talked to those plugs that did the gear job yet? Needa get with you on the TW also..

[CT Performance, Inc.]

I will be pulling both axles from my '04 but not for awhile...2-3 months if interested..about 65k miles

[lamoparpower]

Originally Posted by CT Performance, Inc.

I will be pulling both axles from my '04 but not for awhile...2-3 months if interested..about 65k miles

pm what price your thinking and what gear ratio....