|
|
|
- HOME
- FORUMS
- GARAGE
- ARTICLES
- CHAT
- CLASSIFIEDS
- VIDEOS
- TECH
- STORE
- SPONSORS - - REGISTER - CALENDAR - SITE HELP - ARCADE - STAFF - MEMBERSHIP - GET A QUOTE |
|
Welcome to the Ford Powerstroke Diesel Forum, the fastest growing Ford Diesel Community on the internet! You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us |
|
|||||||
|
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Truck running rough, need help!
Getting ready to leave on a camping trip tommorrow pulling my 38' 5th wheel. Late today it began running rough. It has a very choppy idle and gets worse when I accelerate and is noticable the entire time I drive it. There seems to be no loss of power. I have no check engine lights. I put it on a scanner and there are no codes. I did an injector buzz test and cylinder contribution tests and they were all good. ICP at idle is 530psi, IPR duty cycle is 9% at idle. I had just replaced my gray cps with a black one so for the heck of it I switched them back, but it still is running very rough. I checked all the wiring harness I could find.. My fuel psi is holding steady at 62. I just fueled it up today and put in a Standyne fuel additive. I have ran out of ideas.. Any help?
|
| Sponsored Links |
|
|
|
|||
|
|
|
|||
|
|||
|
|
|
|||
|
the eps sensor or ebp sensor as it should be called will not cause a rough idle , if it passed a buzz test all wiring to injectors should be fine , ipr percentage is suposed to be at 14 % at idle and can cause a slightly rough idle if percentage is that low, i dont see a cps problem , either , sounds like youve done anything i would do , look at the icp sensor and unplug it , see if there is any oil leaking inside the sensor
|
|
|||
|
After some extensive diagnosing today, I finally found the problem. #5 injector had a broken armature screw and so the truck was missing causing a rough idle.. I got it fixed and put back together and she's running great again!
|
| Sponsored Links |
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|