![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
heat/air position switch wont change! Help
Ok i just noticed it tonight but my switch is stuck on defrosed but i can turn the switch but will not change positions. Is there a fuse that might be burnt out and not letting it change? Let me know what you think.
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
the switch has prolly gone bad.........
|
|
|||
|
I don't know about in the 02s, but the 99s run off a vacuum pump. I would start by checking your fuses.
|
|
|||
|
You may very well have a vacuum leak somewhere, If you have the auto lock hubs they are usually where the leak is
|
|
|||
|
I saw there was a fuse for somethin like this last night
|
|
|||
|
Check that fuse if thats not blown you most likely have a vac leak
|
|
|||
|
What do i do if i have a a vac leak. Could my switch be out if so what does it look like
|
|
|||
|
Bet you $5 to a bottle of urine you have a vaccum leak in the hoses to your hubs. When this happens all you get is defrost...that's the signal!
|
|
|||
|
so what would cause a vacum leak. How do i fix it?
|
|
|||
|
Broken hose...loose connection....hole.....
Check your front hubs.....go do it!
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|