EBP Sensor Q

**Young-SC-Owner** · #1 (**permalink**) 03-04-2013, 08:28 PM

I dont know if its causing any issues....But according to the CS its fixed at 44PSI....What problems, if any will be caused because of this?

timmyboy76 · #2 (**permalink**) 03-06-2013, 05:28 AM

not sure, but would say, its good. Think'n, with a stock turbo producing 20psi, the ratio for bp is 2-1

**Young-SC-Owner** · #3 (**permalink**) 03-06-2013, 09:32 AM

I understand that fully, I'm talking static reading is 44

Sent from AutoGuide.com App

kaya@bernhausen · #4 (**permalink**) 03-06-2013, 08:12 PM

disconnect it and connect a new one uninstalled. see if it reads atmospheric. what does your baro and map read, KOEO?
the ebp will be one of the inputs used for load calculation. fuel trim will be effected

**Young-SC-Owner** · #5 (**permalink**) 03-06-2013, 08:35 PM

I will do that when I'm back home, in New Orleans gettin married!

Sent from AutoGuide.com App

kaya@bernhausen · #6 (**permalink**) 03-06-2013, 09:43 PM

my sincerest condolences

kaya@bernhausen · #7 (**permalink**) 03-06-2013, 09:44 PM

JK. congratulations, bud

**Young-SC-Owner** · #8 (**permalink**) 03-06-2013, 09:54 PM

Shotgungirl, from the .org

Met her on ps.org

Sent from AutoGuide.com App

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement