heads 7.3 trucks international vrs 7.3 of f250 00

fordf250honduras · #1 (**permalink**) 10-13-2007, 05:50 PM

i want to change my heads somebody sell me 2 heads of international dt444 but the heads of bus not f250 do u have idea if this heads have diference? low compression i can lose power? with this heads

Cummins_is_Strokens_mess · #2 (**permalink**) 10-13-2007, 05:58 PM

no effence guy but you should probaly type it down so we can understand what your getting at

fordf250honduras · #3 (**permalink**) 10-13-2007, 06:00 PM

ok man ..... no prob i have poor english .........
i have 00 7.3 f250 my question is can i use 7.3 heads take off of DT444 ? NOT ENGINE OF f250 came off of BUS 1997 with international engine DT444

**Dirk** · #4 (**permalink**) 10-13-2007, 06:41 PM

I do not think there is a difference between the powerstroke and the DT444E, but there may be a difference between the year models.

fordf250honduras · #5 (**permalink**) 10-13-2007, 06:43 PM

my question is about lose power

**Dirk** · #6 (**permalink**) 10-13-2007, 06:48 PM

If there is no difference between the powerstroke and DT444E, then you would not gain or lose anything. BUT, there may be differences in the year models of those heads, which in turn may cause problems. From what I recall, I do not remember anything being different.. but I can't be certain.