glo shifts are spazzing

thatguy2010 · #1 (**permalink**) 07-20-2010, 05:36 AM

I have a 2000 with the 7.3 and recently( about 4 months ago ) put the gloshift guages in....well yesterday after playing with my tuner the egt guage started to spaz a little....mainly when I would hit the throttle it would bounce to 0 and than back to where it actually was( right at 500* ).....and when I would let off the throttle completely it would read accurate....I don't know...any ideas?

dannanw · #2 (**permalink**) 07-20-2010, 08:07 AM

I would check ur ground on the gauge, I have the 3in1 and had an issue with that.

jdparadee · #3 (**permalink**) 07-20-2010, 01:11 PM

get a new set of gauges, gloshift gauges are notorious for being cheap in design and function, good gauges are a bit more expensive but i believe you get what you pay for

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement