How to take door panels off - Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 17 Old 08-26-2009, 08:41 AM Thread Starter
Compression Ignition Addict
 
ZombieWeinerDog's Avatar
 
Join Date: Aug 2009
Location: Sparta,Michigan
Posts: 437
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
How to take door panels off

i want to remove the stock speakers and put ion new ones, how do i take the panel off.

Diesel Tech in training!!!!

Early 99 Ford F-250: DIY Intake, straight piped, rust mod, dent mod




ZombieWeinerDog is offline  
post #2 of 17 Old 08-26-2009, 12:21 PM
Compression Ignition Addict
 
460+'s Avatar
 
Join Date: Oct 2007
Location: Liberty,In
Posts: 767
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Pop your window switches out, you will need to take off the plastic piece over the mirror mount holes. There are two screws, one is behind the reflector on the lower rear part of the panel and the other is under the window switch panel. Lift up on the door panel and it should pop off.

99 F350 4x4 dually
7.3 w/K&N af
4" exh into 6" Aussies stacks
4"lift &35" tires
CC mod HP crossover line
Beans stage II 120hp injectors
D66 turbo
ITP regulated return
reburn on TS= 25,high idle,60,100,120,140hp
updated ecm (2000 model)
Dyno#'s 360hp and 965 ft lbs trq
460+ is offline  
post #3 of 17 Old 08-26-2009, 12:47 PM
Serving Our Country!
 
Join Date: Sep 2007
Location: Middleburg, FL
Posts: 371
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Quoted: 1 Post(s)
Feedback Score: 0 reviews
For the rears: skip it and just put a box under the seat. Guaranteed you will break some of the clips (ask me how I know and how much duct tape and glue is needed to fix said clips)

F250 sold.
nc1500 is offline  
post #4 of 17 Old 08-26-2009, 12:56 PM
<-Day Of Fail now SOLD

 
POWERED SPARKLESS's Avatar
 
Join Date: May 2008
Location: Japan
Posts: 3,393
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Quote:
Originally Posted by 460+ View Post
Pop your window switches out, you will need to take off the plastic piece over the mirror mount holes. There are two screws, one is behind the reflector on the lower rear part of the panel and the other is under the window switch panel. Lift up on the door panel and it should pop off.


Way too easy

Tyler T
Sold 2 April 2011
To some lucky SOB
2004 6.0 CC FX4 Lariat
It had all the right things missing or added

Quote:
Originally Posted by DunesRunner08 View Post
IF YOU DO NOT STAND BEHIND OUR TROOPS....FEEL FREE TO STAND IN FRONT OF THEM!!!!!
POWERED SPARKLESS is offline  
post #5 of 17 Old 08-26-2009, 01:06 PM Thread Starter
Compression Ignition Addict
 
ZombieWeinerDog's Avatar
 
Join Date: Aug 2009
Location: Sparta,Michigan
Posts: 437
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
i did it right after i posted this, i did break clips, but i got it off.

Diesel Tech in training!!!!

Early 99 Ford F-250: DIY Intake, straight piped, rust mod, dent mod




ZombieWeinerDog is offline  
post #6 of 17 Old 08-26-2009, 01:12 PM
<-Day Of Fail now SOLD

 
POWERED SPARKLESS's Avatar
 
Join Date: May 2008
Location: Japan
Posts: 3,393
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
That doesn't sound good, might have to replace the panel. I almost did the same thing until I found the screw behind the reflector. Hope all goes well with out vibes

Tyler T
Sold 2 April 2011
To some lucky SOB
2004 6.0 CC FX4 Lariat
It had all the right things missing or added

Quote:
Originally Posted by DunesRunner08 View Post
IF YOU DO NOT STAND BEHIND OUR TROOPS....FEEL FREE TO STAND IN FRONT OF THEM!!!!!
POWERED SPARKLESS is offline  
post #7 of 17 Old 08-26-2009, 01:31 PM Thread Starter
Compression Ignition Addict
 
ZombieWeinerDog's Avatar
 
Join Date: Aug 2009
Location: Sparta,Michigan
Posts: 437
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Quote:
Originally Posted by POWERED SPARKLESS View Post
That doesn't sound good, might have to replace the panel. I almost did the same thing until I found the screw behind the reflector. Hope all goes well with out vibes
i only broke 2, i was fixing my door handle and planned on putting in speakers later, i did remove the one behind the reflector. i have a bunch of speakers, but they are round, i dont think they will fit in.

Diesel Tech in training!!!!

Early 99 Ford F-250: DIY Intake, straight piped, rust mod, dent mod




ZombieWeinerDog is offline  
post #8 of 17 Old 08-26-2009, 01:38 PM
<-Day Of Fail now SOLD

 
POWERED SPARKLESS's Avatar
 
Join Date: May 2008
Location: Japan
Posts: 3,393
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
I've seen several coustom speaker setups that get rid of the lower cubby, some even get rid of the upper cubby and can look really dang good. Not sure but I think I've even 8-10" rounds in them.

Tyler T
Sold 2 April 2011
To some lucky SOB
2004 6.0 CC FX4 Lariat
It had all the right things missing or added

Quote:
Originally Posted by DunesRunner08 View Post
IF YOU DO NOT STAND BEHIND OUR TROOPS....FEEL FREE TO STAND IN FRONT OF THEM!!!!!
POWERED SPARKLESS is offline  
post #9 of 17 Old 08-26-2009, 01:41 PM
FJuanfiddy mod


 
Dave's Avatar
 
Join Date: Nov 2006
Location: Trempealeau, WI
Posts: 31,828
Thanks: 132
Thanked 186 Times in 166 Posts
Mentioned: 0 Post(s)
Quoted: 7 Post(s)
Feedback Score: 0 reviews
Send a message via Yahoo to Dave
Quote:
Originally Posted by POWERED SPARKLESS View Post
I've seen several coustom speaker setups that get rid of the lower cubby, some even get rid of the upper cubby and can look really dang good. Not sure but I think I've even 8-10" rounds in them.
The ones with 8-10" rounds are totally custom door panels and are very expensive. You cannot put that large of speaker in without one. You can put a 5.25 in round in with some trimming. But make sure the clearances are there including depth

Email: Dave@powerstroke.org
2011 F150 Ecoboost Crew cab lariat. Custom tunes from KEM and 5Star, and Unleashed
2012 F150 Crew Cab Ecoboost stock for now-Totaled March 12 2015
2006 F250 ECSB Lariat 4x4

Leveling kit, 315/70/17 Kelly TSRs on Method race wheels
ARP studs and OEM gaskets done by Renegade Diesel
ECM and Atlas 40 FICM tuned by Bill at PHP SCT tunes by Truck Source Diesel. Gearhead, Innovative, Wildman and Tyrant diesel
Flowmaster/MBRP Hybrid Exhaust
Edge Insight CTS
Coolant filter
Bulletproof diesel FICM EGR Delete, Oil Cooler and Water Pump, and Light bar.
Dually LED lights from Stealth Automotive/Xpedition Outfitters
No Limit Fab 6.0 Cold Air Intake
http://www.bulletproofdiesel.com/default.asp
http://nolimitfabrication.com/
Dave is offline  
post #10 of 17 Old 08-26-2009, 02:36 PM Thread Starter
Compression Ignition Addict
 
ZombieWeinerDog's Avatar
 
Join Date: Aug 2009
Location: Sparta,Michigan
Posts: 437
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
i will try to fit some in, i also have a sub box with a 10 inch rockford fosgate amp and 2 tweeters, i want to put them under the seat, how much room is there?

Diesel Tech in training!!!!

Early 99 Ford F-250: DIY Intake, straight piped, rust mod, dent mod




ZombieWeinerDog is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome