Stock Exhaust hanger removal

[UnlimitedLove]

I recived my new 4" exhaust yeserday and am going to attempt installing it tonight.

I straight piped my truck the other day in anticipation of the exhaust but couldn't get the old hanger mounts out of the rubber holders.

Any tips on getting those out would be awesome!!

[bigcountrysg]

WD-40 and elbow grease.

[stroken04]

Originally Posted by bigcountrysg

WD-40 and elbow grease.

lots of WD-40

[tubular031]

WD40 or some spray grease. Also a open wrench. You can use that along with maybe some small wood blocks or another wrench to pry them off the little lips on the hanger.

[UnlimitedLove]

Originally Posted by bigcountrysg

WD-40 and elbow grease.

Damn, that's what I figured

O well thanks for the responses

[blizzardwarrior7]

Ehhh, forget the WD-40, just get down there and wrestle with 'em for a bit.

[bigcountrysg]

Originally Posted by blizzardwarrior7

Ehhh, forget the WD-40, just get down there and wrestle with 'em for a bit.

WD-40 does make it easier.

[Southpaw]

Pb Blaster and channel locks

[99Smokin73Stroker]

Those things are a pain. I can't remember what I did, I just know that it was a pain.

[gtspowerstroke]

WD-40 or some sort of lube helps a lot. I just use that and a long prybar. The older trucks that the rubber has gotten hard is still a pain but most every SD that I've done exhaust on they've been pretty soft and come right off.