ebpv exhaust brake question

polaris rider · #1 (**permalink**) 06-29-2008, 02:55 PM

Does anyone know which wire locks up the torque converter.

polaris rider · #2 (**permalink**) 06-29-2008, 02:58 PM

sorry i forgot to tell you the truck 1999 f 250

cob32187 · #3 (**permalink**) 06-29-2008, 03:48 PM

You will have to have a separate switch to control the TC. Unless you want to have some weird complicated wiring.

cob32187 · #4 (**permalink**) 06-29-2008, 03:54 PM

TC Control Switch Writeup

Here ya go.

**Southpaw** · #5 (**permalink**) 06-30-2008, 05:49 AM

Purple wire with yellow tracer in the gray 16 pin connector on the drivers side wheel well.

polaris rider · #6 (**permalink**) 07-02-2008, 02:11 PM

thanks. one question for southpaw, what is ccv mod.

**Southpaw** · #7 (**permalink**) 07-02-2008, 02:45 PM

Crank Case Vent mod.

Reroutes vapors and oil residue coming out of your crank case out of your intake and dumped to the atmosphere at the back of the truck.

Keeps your intake and your IC pipes clean. Thats why I did it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode