Gauge wiring

[smitty16s]

Ok 7.3 guys im working on my stacks, and simultaneously working on my gauges, I need some advice on where to get the power source for the boost, and pyrometer gauges, any pictures,diagrams, and more appreciated than known, im really blind to electrical in vehicles, so all help is GREATLY APPRECIATED.

[strokin_early_99]

Take a look here: 3-Gauge Install Pictures

[smitty16s]

that does help, do you have any suggestions on other power sources?

[strokin_early_99]

I used a fuse tap and tapped into the fuse box on when I did my truck.

I used the wire on page 2(pic #35) in the diesel manor pics when I installed gauges in my father in-laws truck over the Christmas holiday.

[smitty16s]

when you tapped into the fuse box do you remember which fuse numbers you tapped into?

[strokin_early_99]

Not off the top of my head. I will check in the morning and post back.

[smitty16s]

I appreciate all your help.

[smitty16s]

bump bump

[Fullspeedjunky]

for constant power use the windshield wipers. for the lights follow the directions from diesel manor. For the lights i used the yellow wire on my truck. just finnished my guages last night. i followed thier directions and it was super easy.