tw install directions?

[broncobuyer]

i just recieved my tw ship in the mail 5 min ago but there was no directions with it, can someone give me detailed directions in installing this on a 01 psd? i installed the ts on my 96 but thats a little different than this setup.

[farmboypowerstroke]

when did you order the chip

[broncobuyer]

i ordered it a couple weeks ago and recieved it 5 min ago

[farmboypowerstroke]

Originally Posted by broncobuyer

i ordered it a couple weeks ago and recieved it 5 min ago

I ordered mine the 20th, i'm hoping to get it any time.

[CoalRollinRoosterCruiser]

Originally Posted by broncobuyer

i just recieved my tw ship in the mail 5 min ago but there was no directions with it, can someone give me detailed directions in installing this on a 01 psd? i installed the ts on my 96 but thats a little different than this setup.

Here's a video on how to install it. Its Marty(Maintain), thats doing it. He's installing a DP Tuner Chip in the video, but the instructions our the same no matter what chip you have.

Diesel Movies - I install a DPTuner F5 chip in my buddies truck. Positions were Stock hi idle 60tow 80econo 120 race 140smoke.

[Soaggydogg]

Originally Posted by farmboypowerstroke

I ordered mine the 20th, i'm hoping to get it any time.

Do you live in Kinde, MI?

[farmboypowerstroke]

Originally Posted by Soaggydogg

Do you live in Kinde, MI?

How did you know that? Let me guess you work there?

[Soaggydogg]

Originally Posted by farmboypowerstroke

How did you know that? Let me guess you work there?

No far from it. Just helping a friend with a friend. Tony is busy and I try to help out.

[broncobuyer]

well the directions were spot on, it only took 1/2 hr to install but when i drove it the check engine light comes on on three of the settings. i scanned it for codes and came up with internal control mod KAM error and inj control pressure higher or lower than desired. the truck wasnt runin very good either it was stumbling and missing real bad. there was no paperwork with the chip so i am not sure what position is what. i am gonna try to get a hold of tony and hopefully figure this all out.

[Raul@Stealth Automotive]

if you need the instructions i can email them to you....