aih delete help!!!

[fordboy]

i just bought the aih plug ans sence wirer but it did not come with any direction for the sence wirer can anyone help me?

[gcop]

right here....

[fordboy]

hey thanks but thats only the plug install directions what about the sencer wire

[gcop]

Take the red wire and the black wire off of the OEM AIH. Also take the red wire of of the solonoid (from the larger connector on the solonoid) there is another wire on the solonoid that will come off too, a blue one.

You will need to make a ground wire, use something 14-16 AWG and about 18 inches long or so. Wire loom helps if you have some, just make sure it is out of the way of heat etc. You will need a ring connector on either end, one yellow (this end will go to the solonoid) and one blue (this end will be grounded). Find yourself a good ground, and ground the smaller ring connector and put the other end, back on the solonoid along with teh blue wire that was there before. You will have one wire left, the groung from th OEM AIH, just tape it up and tuck it out of the way, make sure it won't be against anything hot.

That should be work......if it doesn't I was never here. PM me if you need to.

[fordboy]

hey thanks alot