Your going to have to do a bunch of leg work to make it work. DP has their chips locked to their programing. I would start off with getting a F6. You will need a good signal analyzer and a good understanding of how the programming works. Start by cracking DP's encryption algorithm then apply it to TW tunes, you should be able to upload them then. Or you could just use DP tunes on DP hardware or TW tunes on a 6 position chip and save yourself a lot of work. Both companies have great tunes, I like the DP hardware better despite it's sensitivity to RF interference. There is also a new chip similar to DP from PHP, it might take TW tunes, not sure.
Doubt it would work as DP is using a digital switching mechanism. You could build something for the rotary knob. Either add a single digit LED array and use the rotary switch probably with just some diodes and relays to turn on the right segments of the LED. Or build a switcher of your own, perhaps with a PIC, you could program it to accept two inputs, control the LED segments and replicate the output of the rotary switcher.
You can get them from TW, Gearhead, and a few other vendors.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Powerstroke Diesel Forum
5.4M posts
265.8K members
Since 2005
A forum community dedicated to Ford F-series owners and enthusiasts with a Power Stroke diesel engine. Come join the discussion about performance, bulletproofing, modifications, classifieds, troubleshooting, maintenance, and more!