changing the exhaust housing

tubular031 · #1 (**permalink**) 07-08-2012, 04:29 AM

I have the turbo out of the truck (doing up pipes and a few other things...) and I am going to FINALLY put on the 1.0 housing that has been sitting in the garage for about 2 years now. What is the trick to getting the bolts out that hold on the exhaust side? I can not seem to get a wrench in there to access them. What am I doing wrong? Any tips or tricks?

Thanks.

tubular031 · #2 (**permalink**) 07-08-2012, 06:04 AM

i was able to get a small box wrench in there and little by little remove the bolts. the the housing needed a few love taps with the hammer to get it to pop loose

CMCA swartzkrautheim · #3 (**permalink**) 07-08-2012, 07:45 AM

mine took a few min with my trusty torch set lol

**HillClimber350** · #4 (**permalink**) 07-08-2012, 01:29 PM

That's going to be my next mod

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement