Bully Dog Power Hound HELP

silverbullet · #1 (**permalink**) 09-21-2007, 01:26 PM

Hey guys I need some help a friend of mine gave me a bully dog Power Hound and I do not know how to install it or any thing can any of you help me with the info and if it is any good or not I have a 2000 7.3

***vitalidle*** · #2 (**permalink**) 09-21-2007, 01:33 PM

Hmm not familiar with the powerhound. Is it a programmer or chip?

Strõkër~X · #3 (**permalink**) 09-21-2007, 01:49 PM

guess he went to check !

silverbullet · #4 (**permalink**) 09-21-2007, 01:51 PM

it is a box that plugs in under the hood it is gold with red ends and is like the dyno dominator for the 6.0

***vitalidle*** · #5 (**permalink**) 09-21-2007, 01:55 PM

Sounds like a module. Could check the bully dog website to see if they have any install instructions online.

***vitalidle*** · #6 (**permalink**) 09-21-2007, 01:59 PM

Here is some instructions I found. Bully Dog Transmission Gauge Part# 041073

silverbullet · #7 (**permalink**) 09-21-2007, 06:48 PM

It is a module Bully Dog tould me that the did not make it any more and they could not help me so I turned to you guys do any of you have one of these

Bully Dog Power Hound 7.3 #41073 - BT41073

**Rob** · #8 (**permalink**) 09-21-2007, 07:19 PM

it should plug into the PCM wiring harness or something like that under the hood. i remember seeing this product a while back but did not see how it went in the truck. ill try searcing for instructions.