Compression Ignition Addict
Join Date: Oct 2006
Location: Bend, Or
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Thanked 49 Times in 47 Posts
Feedback Score: 0 reviews
If your going to add a wastegate control rod, do it right and once.
The Turbomaster WG controler is the best one by far you can add to the 7.3...
However keep in mind anything over 27-30psi on the stock turbo is nothing more then hot air. As well as very hard on the bushings of the turbo.
Back pressures on the stock turbo at 25psi can be as high as 70-75 psi... NOT GOOD.
01 F-250 SC PSD,320k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100 from P.I.S, Studs, 910 springs, Forged rods, Water injection,Hydra chip-No Limit/Gearhead tuning, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
DYNOPROVEN.COM, PERFORMANCEINJECTIONSYSTEMS.COM and RIFFRAFFDIESEL.COM