Ford Powerstroke Diesel Forum banner

7.3l build up

3K views 7 replies 6 participants last post by  DirtyDiesel 
#1 ·
i wanna go with stage 3 maybe 4 injectors gt42 turbo maybe be in 500-600 reange beside head steds what major internals do i need to upgrade
 
#2 ·
You will find alot of good info on this site if you search. But you need to tell us more information on your build. What year truck?
 
#5 ·
2002... PMR's... need rods...

550 recipe...

250/200% hybrids
Modded H2e or S300
Studs
Valve springs
Good tuning... Beans, Gearhead, Powerhungry Performance, Swamps...

and a tranny to hold it...

With tuning that could make close to 600...

With a oil system it would make 600...
 
#6 ·
def gonna need at least some forged (OBS or early SD) rods. with that kinda power ul be dam near the max of stock forged stuff. id prolly go ahead and buy some 4340 one jus to be safe. u never know u might wanna add some spray later on. :thumb::icon_ford:
 
#7 ·
If you already have a Forged Rod Block...

Gen 3 - 1650
Fuel System - 1200
Modded S400 - 1700
T4i mount - 1250
Injectors - 2800
Springs,Studs,Pushrods - 1000
Intake/Exhaust/Gauges - 1000
Transmission - 4900
Labor to install - ?

Fuel Pressure, EGT, Trans, boost, drive pressure.

$15500

If you have a PMR block... I'd swap in a forged rod and run it while building the PMR block up. Rods, Girdle, Pistons, Machining, Ported Heads, etc...
 
#8 ·
dunno where ur at but if u dont hav forged stuff or if ur wanting some spare stuff. i hav a forged long block assembly that i hav no use for. if ur interested. PM me.:thumb::icon_ford:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top