Ford Powerstroke Diesel Forum banner

put a 1997 front end in a 2003?

1K views 3 replies 3 participants last post by  sharkstower 
#1 ·
I have a 97 4x4 and a2003 2x4 could i put the dana 60 from the 97 under the 2003 both 350's just wonderin if it would work thanks...
 
#2 ·
Yes it can be done. But you will have to get leaf springs for a SD and also a transfer case for it. And lots of other little things.
 
#3 ·
Wheel bolt pattern will be diffrent... 8 on 6.5" for the '97, vs. the 8 on 170mm for the '99-up trucks... means diffrent rims front and back, or adaptors...
 
#4 · (Edited)
sounds like allot of finageling to me the rims are the deal breaker.... Anyone on here want to trade a 97 350 4x4 cc 7.3 xlt new shocks rancho 9000 pipe bumper sprayin liner rebuild heads new injectors glow plug rebuild pcm new sensors valve cover gaskets.. not running----.for all the parts ill need off a donor truck for the 2x4 to 4x4 conversion? Let me know.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top