auto to man can it be done resonably?

[blandproud]

well i miss my old 4 speed 87 and miss the reliable fun part. I now have a auto, with fresh rebuild 1000 miles on it but just not feelin it in my 99 stroker. has anyone ever swaped a 6 speed into a 99-03 that was an auto? i know i will need alot of stuff but what about electrical and such? anyone have any ideas on this? i would like to have the man back so i could truck pull and ect without worrying about the 3k trans bills.

[Austinj427]

Well, ill add what I can, Find a zf-6, cut a hole in your floor, get your chip reburned.. Thats all i can do for you but here is a bump for ya

[REDPOWERSMOKER]

WHERE ARE YOU LOCATED?

[blandproud]

im located in mississippi.

[burmad69]

The easiest way would be to find one with a stick in the bone yard and get all the necessary parts.

[blandproud]

Originally Posted by burmad69

The easiest way would be to find one with a stick in the bone yard and get all the necessary parts.

thats what i was thinkin but its hard to come accross these trucks in the yards. especially findin a man one.

[REDPOWERSMOKER]

drive to texas and ill swap with ya

[blandproud]

what we swappin everything? let me know

[REDPOWERSMOKER]

WELL I HAVE A MANUAL YOU HAVE A AUTO IT WOULD BE A SIDE BY SIDE SWAP

[bigcountrysg]

You need the clutch/brake pedal assembly, fly wheel, clutch, throw out bearing, clutch cylinder, pcm, reburnt chip, the hole should already be in the floor. You just need to remove the plate that is covering it. I am sure there are some other parts I am not covering. But that is the main parts needed besides the trans.