Boost Gauge Tap Area

[MR.TRIMIX]

Can You Tap Into The Inercooler Outlet For Boost Guage Pressure?

[wired1]

I guess you could but why? Use a t in the map sensor or get rid of your aih and use that.

[Marty]

I'll elaborate somewhat. You can either splice into the Map line, or drill/tap/install a boost fitting on the AIH... and delete the AIH at the same time.

[wired1]

i should have went into detail, thanks

[MR.TRIMIX]

1)WHAT IS THE AIH?
2) I HAVE A POP OFF VALVE INLINE WITH THE MAP SENSOR(opens at 24psi to avoid defueling)

[steph38]

Originally Posted by MR.TRIMIX

1)WHAT IS THE AIH?
2) I HAVE A POP OFF VALVE INLINE WITH THE MAP SENSOR(opens at 24psi to avoid defueling)

AIH = AIR INTAKE HEATER go on DFUSER site u will find an AIR INTAKE HEATER plug with a boost fitting soooo u don't need to drill nothing.:nono:

[wired1]

here a link to pick one up as well
Our Ford Products, Exclusive Products