Clutch Slipping

kcrochet · #1 (**permalink**) 12-03-2006, 04:22 PM

What do you guy's recommend for a clutch. I don't want to spend a fortune but I don't want to buy junk.

House22 · #2 (**permalink**) 12-03-2006, 04:26 PM

I ran the Luk in my truck for a while it handled 350hp on the dyno and a few pulls.

farmboysdiesel · #3 (**permalink**) 12-04-2006, 07:34 AM

South Bend all the way - feel free to phone with questions.

**SCUFFY828** · #4 (**permalink**) 12-04-2006, 07:40 AM

had alot of luck with LUK brand clutches ,also has a kit to replace dual mass to solid flywheel works excellent, as far as price , about 750.00 for entire kit

99Smokin73Stroker · #5 (**permalink**) 12-04-2006, 10:46 AM

A lot of guys are all about the SB clutches. I was looking at getting one, but their "best" single disk will cost 800 bucks just for the clutch, minus install.

farmboysdiesel · #6 (**permalink**) 12-04-2006, 10:52 AM

Price depends on the power level - they also come with a new flywheel which includes a kevlar pilot bearing.

kcrochet · #7 (**permalink**) 12-05-2006, 04:46 PM

I'm going change the clutch tommorrow. The guy recommended the a c delco?????? Who ever heard. Delco building parts for ford?

99Smokin73Stroker · #8 (**permalink**) 12-05-2006, 08:51 PM

That does seem to be quite odd.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement